Characteristics and installation essentials of plywood

Plywood needs to be processed, which means that the wood is cut into veneer and then pressed into the plywood with heat and glue. Plywood is mainly divided into three types: vertical wood has a uniform striped appearance and the characteristics of horizontal wood. "Fingers" combine cut wood with superhard resin, making it a tough and expensive veneer.
The plywood is made of solid mortise and tenon board and engineered board, with the veneer glued to the back of the plywood. The two types have a thickness of 1/2 to 5/8 inches, a width of 3-1/2 to 7-1/2 inches, and a variable length. The installation method of solid plywood is the same as any hardwood floor: it can be nailed, nailed, or glued to a solid underlying floor or existing hardwood floor in good condition. Engineering wood is usually installed in the floating floor system, and a click board is laid on the soft foam pad. There are no nails, so the installation is very friendly and proceeds very quickly. Engineering boards and solid boards are pre arranged with various dyes, so you can skip any arrangement.
Plywood can be installed in any place where ordinary hardwood flooring is installed. Due to its characteristics similar to composite materials, solid plywood is prone to warping due to excessive moisture. Not recommended for use in bathrooms, laundry rooms, and basements.
Plywood is not easily affected by moisture and can be placed in any room, including basements (please check the manufacturer's recommendations before purchasing). However, long-term dampness in the basement can still pose problems for engineering plywood. Installing a steam barrier under a floating floor system can help prevent moisture and mold, but if your basement experiences flooding or damp areas, avoid installing engineered panels.